A progressive approach to predict shot peening process parameters for forming integral panel of Al7050-T7451

In this paper, a progressive approach to predict the multiple shot peening process parameters for complex integral panel is proposed. Firstly, the invariable parameters in the forming process including shot size, mass flow, peening distance and peening angle are determined according to the empirical and machine type. Then, the optimal value of air pressure for the whole shot peening is selected by the experimental data. Finally, the feeding speed for every shot peening path is predicted by regression equation. The integral panel part with thickness from 2 mm to 5 mm and curvature radius from 3200 mm to 16000 mm is taken as a research object, and four experiments are conducted. In order to design specimens for acquiring the forming data, one experiment is conducted to compare the curvature radius of the plate and stringer-structural specimens, which were peened along the middle of the two stringers. The most striking finding of this experiment is that the outer shape error range is below 3.9%, so the plate specimens can be used in predicting feeding speed of the integral panel. The second experiment is performed and results show that when the coverage reaches the limit of 80%, the minimum feeding speed is 50 mm/s. By this feeding speed, the forming curvature radius of the specimens with different thickness from the third experiment is measured and compared with the research object, and the optimal air pressure is 0.15 MPa. Then, the plate specimens with thickness from 2 mm to 5 mm are peened in the fourth experiment, and the measured curvature radius data are used to calculate the feeding speed of different shot peening path by regressive analysis method. The algorithm is validated by forming a test part and the average deviation is 0.496 mm. It is shown that the approach can realize the forming of the integral panel precisely.     

在二元柔壁自适应风洞中利用面元法进行三元模型实验

简要叙述了在西北工业大学二元柔壁自适应风洞中利用面元法进行二元半机翼模型试验的研究情况，分析了面元法的基本思想和部分试验结果。     

稠密颗粒增强复合材料应变分布规律和刚度张量

针对高体积份数、随机分布、等轴状颗粒增强复合材料 ,研究了材料的应变分布规律 ,给出了基体和增强体应变平均值与材料微观结构参数之间的定量关系。结果表明 ,除应变平均值外 ,应变涨落是影响刚度张量的另一个重要因素 ,研究了应变涨落与材料微观结构参数之间的关系 ,并推导出了复合材料的刚度张量。与实验结果和以往的理论比较 ,预测结果与实验结果吻合良好     

复合材料层板中就位横向拉伸强度的研究

本文利用弹性力学和断裂力学方法对纤维增强复合材料的横向拉伸强度进行了分析，其中考虑了９０度开裂层厚度和开裂邻层的约束效应的影响，推导出正交各向异性对称铺层中昨合就位横向拉伸强度的数学表达式，得出开裂层的厚度和约束邻层铺设角对就位横向拉伸强度都有影响的结论，理论计算与Ｆｌａｇｇｓ实验结果吻合较好。     

泰扶纤维加固钢筋砼梁抗剪性能试验研究与理论分析

分析了12片粘贴泰扶高强复合纤维的钢筋混凝土矩形梁的抗剪性能，并与2片比较梁进行比较，研究该加固技术的抗剪加固效果。确定了纤维粘贴量、包裹方法和剪跨比等因素对钢筋混凝土加固梁抗剪性能的影响程度，提出了抗剪加固设计中的复合纤维设计应变的合理取值、加固设计模型和设计方法。通过非线性计算程序计算验证本文计算公式是合理的、可行的。     

碳纤维湿法缠绕基体配方及成型研究

研究了碳纤维增强复合材料用湿法成型工艺、基体配方的性能和使用期。研究的HTllA、HTllB两种配方浇注体拉伸强度达到100MPa以上。模量为3．9GPa．力学性能优良。配方具有较高的耐热性。使用期大于9h，完全适用于湿法缠绕成型。缠绕的~H50mm碳纤维增强复合材料容器特性系数(Py／Ⅳ)均大于34km．纤维强度转化率(K)达到82％以上。     

复合材料壳体磁场固化技术

环氧树脂基复合材料及缠绕壳体在磁场中缠绕和固化的技术为前苏联独有,美国只作了一些验证研究。这种技术使得复合材料加工过程中树脂基体发生物理和化学变化,固化后力学性能显著改善,而且质量更加稳定。实现该技术的设备已在前苏联应用。磁场中固化还适用于树脂涂层和粘接层。     

混杂纤维缠绕壳体设计

应用网格理论，得到了固体火箭发动机混杂纤维缠绕壳体在内压作用下的平衡方程。给出了混杂纤维缠绕圆筒壁厚的计算公式。讨论了用模拟实验压力容器确定纤维发挥强度的问题。算例表明，文中给出的设计计算方法，可用于混杂纤维缠绕壳体的初步设计。     

偶联涂层处理对APMOC/环氧复合材料层间剪切性能的影响

介绍了溶剂、硅烷偶联剂浓度、含胶量等对APMOC/环氧层间剪切强度(ILSS)影响的研究结果,并初步探讨了其改性机理和涂层厚度控制的一些问题。     

谈我院综合教学楼的设计

本文简明扼要地介绍了我院新建综合教学楼在有限的建筑用地范围内，为满足各项功能要求的建筑设计思路及结构上的处理方法。